The IC660TBA104 terminal assembly from GE Fanuc is part of the Genius I/O series and it comprises 4 input circuits and 2 output circuits. The terminal directs analog currents and converts them to a digital value. The final value is directed to the CPU unit and all the inputs are completely isolated from the block circuits. The IC660TBA104 terminal assembly supports a specific data format that is received through the inputs at a rate of up to 8 bytes and it is compatible with programmable logic devices from GE Series 90, Series 6, and Series 5. The terminal supports an output data rate of up to 4 bytes and it is converted into the correct signal for use with the output device. The terminal is used for temperature monitoring and all the values are transmitted as complete integers. The terminal supports the use of a hand-held display for inputs and outputs and it has advanced diagnostics that provide the necessary means for fault detection and reporting.
The IC660TBA104 terminal assembly supports the separate scaling of its circuits and it operates with the proper engineering units that are required to define the correct power levels for the I/O. The users can configure the hand-held monitor connected to the terminal assembly through a couple of simple steps and they can adjust the following parameters: the output default value, whether the device should hold the last state, the time for feedback/input conversion, and the thresholds for the alarms. In addition, the IC660TBA104 terminal allows appropriate protection for configured features through hand-held monitor. The IC660TBA104 terminal assembly is designed for 115 Volts Volts AC and 125 Volts DC votlage operation and it has maximum current rating of 250 milliamps for use on an AC power source and a rating of 140 milliamps for use on a DC power source.
Technical Specifications
| Brand | GE Fanuc |
| Series | Genius I-O |
| Part Number | IC660TBA104 |
| Block Type | 4 input and 2 output circuits |
| Rated Voltage | 115 Volts AC / 125 Volts DC |
| Power Supply Voltage | 93 to 132 Volts AC / 105 to 145 Volts DC |
| Maximum Current | 250 milliamps (AC) / 140 milliamps (DC) |
| Frequency/Ripple | 47 to 63 Hertz / 10% maximum ripple |
| Power Supply Dropout Time | 1 cycle (AC) / 10 milliseconds (DC) |
| Heat Dissipation (Maximum) | 12 Watts |
| Block to Block Isolation | 1500 Volts for 1 minute |
| Group to Group Isolation | 300 Volts |
| Dimensions (HxWxD) | 224 x 88 x 100 millimeters (8.8 x 3.5 x 3.9 inches) |
| Weight | 1.8 kilograms (4 pounds) |
| Operating Temperature | 0 to 60 degrees Celsius (32 to 140 degrees Fahrenheit) |
| Storage Temperature | -40 to 100 degrees Celsius (-40 to 212 degrees Fahrenheit) |
Our brand:
【Honeywell】 Module DCS/PLC/Transmitter
【Emerson/Delta V】 Module/ CT Motor & Drives
【ABB】 I/O Module
【AB】 Module&Touch Screen
【Rosemount】 Transmitter
【Yokogawa】 Transmitter
【Yaskawa】 Servo Drive&Servo Motor
【GE/Fanuc】 IC69 Series PLC
【Mitsubishi】 Servo Drive&Servo Motor
(Modicon,SMC,SICK,NORGREN,Siemens,Ebmpapst etc.)
Order Process:
1, First, send us the brand, model code/pic of the nameplate, the quantity for inquiry. Then we will send the quote to you. after confirming the model and the quantity, then we will the PI to you.
2, You can transfer by Paypal/ Western Union/Trade assurance/ T/T. When we received the payment, then we will start to prepare the order for you asap.
3, We can according to your shipment to ship out the goods, Or we also can help you to ship out the goods directly. And the tracking number will send you by the next day.
4., Usually for our inventory goods only need to take about 3-5 days.
5. If you also have any questions, you can ask me any time, right below is my contact.
FAQ
* Q: Do you provide a warranty for the goods?
A: Yes, we provide a warranty for all the goods from us.
* Q: Could Wisdomlong provide technology support?
A: We're in this field for more than 8 years. If there's any problem, please contact with us, we'll provide a suggestion from our
engineer to help you solve the problem.
* Q: Does Wisdomlong keep goods in stock or only trading?
A: We have a large warehouse for goods. Keep lots of goods in the warehouse, so could promise a fast delivery.
* Q: What is your MOQ?
A: We provide you small MOQ for each item, it depends on your specific order!
* Q: Do you test all your goods before delivery?
A: Yes, we have 100% test before delivery.
* Q: How do you make our business long-term and good relationship?
A: We keep good quality and competitive price to ensure our customers benefit ;
We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from.
Send your Inquiry details in the Below, Scan "The QR Code" Now!
